Availability: | |
---|---|
Quantity: | |
QLM series
Huarui
Full-auto Continuous Tire Cracking Equipment /Tire Refining Machine
Raw materials
NO. | Raw material | Note |
1 | Waste tyre | All kinds tyre ok |
2 | Waste plastic | PE is best |
3 | Waste rubber | Waste shoe sole, waste cable sheath |
4 | oil sludge | oil tank sediment etc... |
Machine introduction
The machine is universal, Just processing a little different. Our engineer will training you as your raw material use.
Summary: as long as the organic can be cracked out of oil.
2) Equipment type and model introduction
Tire cracking equipment has intermittent semi-automatic cracking equipment (referred to as "semi-automatic equipment") and continuous automatic cracking equipment (referred to as "automatic equipment"), The detailed model and specification are listed as below:
(1) Intermittent semi-automatic cracking equipment
Intermittent semi-automatic cracking equipment can handle the whole tire, the daily handling capacity ranging from 5 tons to 12 tons. The batch need to stop heating after finished tire processing, and take out solid products (carbon black and steel wire) manually.
Detail pictures
Machine model
Continuous automatic cracking equipment mainly treated the rubber granule smaller than 5mm, the daily handling capacity is from 15 ton to 35 ton range, it is fully automatic, can work without interruption, and automatically discharged solid products (carbon black and steel wire) from the batch, no need manual working.
NO. | Model No. | Main machine size | Handling capacity |
1 | QLM-15T | 11000×1500mm | About 15ton/day |
2 | QLM-25T | 11000×1700mm | About 25ton/day |
3 | QLM-35T | 11000×1900mm | About 35ton/da |
End products
Name | Output | Application |
Tire Oil | 42% | *Can be sell directly. |
Carbon Black | 33% | *Can be sell directly. |
Steel Wire | 17% | *Can be sell directly. |
Oil Gas | 8% | *Can be as fuel heating machine by using gas burner instead of fuel. |
Shipment photos
CE certificate
Full-auto Continuous Tire Cracking Equipment /Tire Refining Machine
Raw materials
NO. | Raw material | Note |
1 | Waste tyre | All kinds tyre ok |
2 | Waste plastic | PE is best |
3 | Waste rubber | Waste shoe sole, waste cable sheath |
4 | oil sludge | oil tank sediment etc... |
Machine introduction
The machine is universal, Just processing a little different. Our engineer will training you as your raw material use.
Summary: as long as the organic can be cracked out of oil.
2) Equipment type and model introduction
Tire cracking equipment has intermittent semi-automatic cracking equipment (referred to as "semi-automatic equipment") and continuous automatic cracking equipment (referred to as "automatic equipment"), The detailed model and specification are listed as below:
(1) Intermittent semi-automatic cracking equipment
Intermittent semi-automatic cracking equipment can handle the whole tire, the daily handling capacity ranging from 5 tons to 12 tons. The batch need to stop heating after finished tire processing, and take out solid products (carbon black and steel wire) manually.
Detail pictures
Machine model
Continuous automatic cracking equipment mainly treated the rubber granule smaller than 5mm, the daily handling capacity is from 15 ton to 35 ton range, it is fully automatic, can work without interruption, and automatically discharged solid products (carbon black and steel wire) from the batch, no need manual working.
NO. | Model No. | Main machine size | Handling capacity |
1 | QLM-15T | 11000×1500mm | About 15ton/day |
2 | QLM-25T | 11000×1700mm | About 25ton/day |
3 | QLM-35T | 11000×1900mm | About 35ton/da |
End products
Name | Output | Application |
Tire Oil | 42% | *Can be sell directly. |
Carbon Black | 33% | *Can be sell directly. |
Steel Wire | 17% | *Can be sell directly. |
Oil Gas | 8% | *Can be as fuel heating machine by using gas burner instead of fuel. |
Shipment photos
CE certificate