Welcome to Xuchang Huarui Machinery Co.,Ltd.
 |
| Quantity: | |
|---|---|
Product Introduction:
The OTR tire wire debeader belong to waste tire recycling machine, it is used to pull steel wire out of the OTR tire at one time. It can deal with OTR tire with diameters up to 4 meters. It use hydraulic system and the operator can operate the machine by control panel easily.
Product Advantages
OTR Tire Hydraulic Wire Removal Machine Core Advantages (Simple and Easy-to-Remember Version)
1. Extremely High Efficiency: Automatic hydraulic wire removal, several times faster than manual/gas cutting; a giant OTR tire can be completed in minutes.
2. Safe and Reliable: Completely away from steel wires and tire beads, eliminating the risk of manual hammering or cutting, significantly reducing workplace injuries.
3. Intact Wire Removal: No burning, no explosion, no breakage; high wire recovery rate and higher selling price.
4. No Damage to the Tire Body: Only steel wires are removed, keeping the rubber intact, facilitating subsequent crushing, oil refining, and retreading.
5. Wide Applicability: Can process various giant engineering tires, mining tires, and OTR tires.
6. Simple Operation and Labor Saving: Operates with only 1-2 people; one-button hydraulic control; extremely low labor intensity.
7. Stable Operation and Low Maintenance: Mature and durable hydraulic system with few vulnerable parts, suitable for long-term continuous operation in factories.
8. Environmental compliance: No open flame, no smoke or noise pollution, meeting the environmental protection requirements for waste tire disposal.
Details show
Technical data
OTR Tire steel pulling machine | SP-4000 |
Pulling motor | 3500 psi (20hp) |
Hydraulic Cylinder | 220 tons |
Motor brand | Siemens |
Equipment dimensions L*W*H | About 7500*2500*3000mm |
Equipment Weight | About 8-10Tons |
Configuration
1 | Mobile car with pulling hook | It is used for move the hook back and forward. |
2 | Oil station | It includes motor, oil pump, oil tank. |
3 | Supporting Frame | It is used for supporting the pulling machine and fixing on the floor. |
4 | Hooks | It is used for hooking the tire steel. |
6 | Hydraulic cylinder | The hydraulic cylinder can convert the pressure energy output by the hydraulic pump into mechanical energy, thereby pushing the actuator to move. |
7 | Basement of the Hook | Wall supporting the Hook. |
8 | Supporting Tire Plate or Base | Wall to support the hydraulic pressure and where the tire goes. |
9 | Guillotine for Inter Cutting Of the Steel | Guillotine that will cut the wires that separate from the tires. |
10 | Structure Equipment | Reinforced structure that supports all equipment and Made in Q235 steel |
11 | The hydraulic hoses are made of 3 high-performance 1.5" canvases | |
Product uses
This type of equipment is mainly used to completely extract the steel wires from the bead of giant off-road tires used in mining and engineering. It relies on a powerful hydraulic system to provide pulling force and achieve the separation of the steel wires from the rubber.
FAQ
Q: What's the lead time for orders?
A: 15–30 days
Q: Do you provide after-sales service overseas?
A: Yes, our engineer is available.
Q: Can I request a customized bucket size?
A: Absolutely!
Q: What documents do you provide for export?
A: Full export package (Commercial Invoice, Packing List, Bill of Lading, etc.).
Q: How do I place an order?
A: Contact us via email/phone for a quote, then confirm with a PO.
Other Grouped equipment
OTR Tire Cutting Machine
Tire Shredder
Tire crusher
Packing & Delivery
Clients
Product Introduction:
The OTR tire wire debeader belong to waste tire recycling machine, it is used to pull steel wire out of the OTR tire at one time. It can deal with OTR tire with diameters up to 4 meters. It use hydraulic system and the operator can operate the machine by control panel easily.
Product Advantages
OTR Tire Hydraulic Wire Removal Machine Core Advantages (Simple and Easy-to-Remember Version)
1. Extremely High Efficiency: Automatic hydraulic wire removal, several times faster than manual/gas cutting; a giant OTR tire can be completed in minutes.
2. Safe and Reliable: Completely away from steel wires and tire beads, eliminating the risk of manual hammering or cutting, significantly reducing workplace injuries.
3. Intact Wire Removal: No burning, no explosion, no breakage; high wire recovery rate and higher selling price.
4. No Damage to the Tire Body: Only steel wires are removed, keeping the rubber intact, facilitating subsequent crushing, oil refining, and retreading.
5. Wide Applicability: Can process various giant engineering tires, mining tires, and OTR tires.
6. Simple Operation and Labor Saving: Operates with only 1-2 people; one-button hydraulic control; extremely low labor intensity.
7. Stable Operation and Low Maintenance: Mature and durable hydraulic system with few vulnerable parts, suitable for long-term continuous operation in factories.
8. Environmental compliance: No open flame, no smoke or noise pollution, meeting the environmental protection requirements for waste tire disposal.
Details show
Technical data
OTR Tire steel pulling machine | SP-4000 |
Pulling motor | 3500 psi (20hp) |
Hydraulic Cylinder | 220 tons |
Motor brand | Siemens |
Equipment dimensions L*W*H | About 7500*2500*3000mm |
Equipment Weight | About 8-10Tons |
Configuration
1 | Mobile car with pulling hook | It is used for move the hook back and forward. |
2 | Oil station | It includes motor, oil pump, oil tank. |
3 | Supporting Frame | It is used for supporting the pulling machine and fixing on the floor. |
4 | Hooks | It is used for hooking the tire steel. |
6 | Hydraulic cylinder | The hydraulic cylinder can convert the pressure energy output by the hydraulic pump into mechanical energy, thereby pushing the actuator to move. |
7 | Basement of the Hook | Wall supporting the Hook. |
8 | Supporting Tire Plate or Base | Wall to support the hydraulic pressure and where the tire goes. |
9 | Guillotine for Inter Cutting Of the Steel | Guillotine that will cut the wires that separate from the tires. |
10 | Structure Equipment | Reinforced structure that supports all equipment and Made in Q235 steel |
11 | The hydraulic hoses are made of 3 high-performance 1.5" canvases | |
Product uses
This type of equipment is mainly used to completely extract the steel wires from the bead of giant off-road tires used in mining and engineering. It relies on a powerful hydraulic system to provide pulling force and achieve the separation of the steel wires from the rubber.
FAQ
Q: What's the lead time for orders?
A: 15–30 days
Q: Do you provide after-sales service overseas?
A: Yes, our engineer is available.
Q: Can I request a customized bucket size?
A: Absolutely!
Q: What documents do you provide for export?
A: Full export package (Commercial Invoice, Packing List, Bill of Lading, etc.).
Q: How do I place an order?
A: Contact us via email/phone for a quote, then confirm with a PO.
Other Grouped equipment
OTR Tire Cutting Machine
Tire Shredder
Tire crusher
Packing & Delivery
Clients
