4 Meters OTR Tire Cutting Machine

Product Introduction:

The OTR tire cutter belong to waste tire recycling machine, it is used to cut large OTR tires /giant engineering tires to smaller pieces. It can deal with all kinds of nylon tires, radial tire (<= 4000 mm diameter).

The OTR cutter is composed of motor, hydraulic system, oil cylinder, one pair of blade, frame and rotating body etc.

The basic principle is: motor drive hydraulic system and the cylinder place the tire on the blade, two blades rotating blades forming shear, achieve the effect of shear. This hydraulic oil cylinder has a very big power, so it can cut the 8-10cm steel wire which is mix within the OTR tire.

Feature:

This equipment is with good shear effect, shearing speed, low energy consumption, easy operation and safety.

Technical parameters:

Advantages of OTR Tire Cutting Machines

1. Compatible with Giant OTR Tires, Wide Range of Applications

Designed specifically for large mining tires, engineering giant tires, and heavy-duty port tires, it can handle large-diameter, high-hardness OTR tires with steel wires, solving the problem of ordinary equipment being unable to cut them.

2. Hydraulically Driven, Strong Cutting Force, Stable Operation

Utilizing a high-tonnage hydraulic system, it boasts strong shearing force and ample power, ensuring smooth cutting without tire jamming or blade breakage. It efficiently cuts steel-wire tires and thickened tire bodies as well.

3. One-Step Cutting, High Pre-processing Efficiency

It can directly and quickly cut whole tires into blocks/strips, making it an ideal pre-processing equipment before tire crushing, pyrolysis, and rubber powder production lines, significantly improving the efficiency of the entire recycling line.

4. Wear-Resistant and Durable Blades, Low Maintenance Costs

Equipped with high-strength wear-resistant alloy blades, it has a long service life, is easy to replace, and reduces long-term use and maintenance costs.

5. Fully Automatic/Semi-Automatic Operation, Safe and Worry-Free: Simple operation process, one-button start, equipped with safety protection and emergency stop devices, reducing manual intervention and lowering operational risks.

6. Robust Structure, Adaptable to Harsh Working Conditions: Heavy-duty frame design, strong load-bearing capacity, and shock resistance, allowing for long-term stable operation in complex environments such as mines, recycling plants, and processing plants.

7. Energy-Saving and Environmentally Friendly, Meets Recycling Industry Standards: Low noise, low energy consumption, and no dust pollution, meeting the environmental requirements for the resource recycling of waste tires.

Maintenance：

You can change the hydraulic valves every 4-5 months, and add the hydraulic oil every 2months.

And the blade can be used to cutting 2000T tires, if there is wearing, it can be repaired; if damaged it was easy to change.

Cutters for smaller tires 2 meters and below